Do you know how to clean your cordless bagless vacuum cleaner? And most importantly, the best way to do it, to ensure that the vacuum stands the test of time? Let's show you how to clean a bagless vacuum cleaner even if it stinks. If you can do this, then your appliance will be of the best performance all year round. This is because dust, pet hair, threads, and other particles may affect its ability to suck up dirt, and that could mean more time spent cleaning.

On the other hand, bagless vacuum cleaners have gained popularity of late due to the advantages they have over bagged vacuums. These advantages include:

  • Bagless vacuum cleaners are cheaper to operate and maintain.
  • A bagless vacuum makes it easier to know when the appliance needs to be emptied and if it is working well.
  • Unlike a bagged vacuum, you are not required to change the filter as frequently.
  • Bagless vacuums help you to save money since the purchase of new dustbags is not needed every month.
  • Bagless vacuums are environmentally friendly because the bags are not thrown with the dirt.

Steps on How to Clean a Dirty Cordless Bagless Vacuum

Here are the simples steps on how to clean your cordless bagless vacuum cleaner:

1. Empty the Dust Cup and Chamber

The dust cup is transparent, and it can be found in an airtight chamber. Dust and dirt can accumulate in the dust cup and its chamber, which makes it needful to clean these areas. What you should do here is to empty the dust cup after every use, but clean it once a month. Depending on the design of the vacuum, you may need to remove the dust cup altogether to empty it or remove the chamber from the vacuum to dispose of its content.

On the other hand, frequent disposal of the content of the dust cup comes with several advantages. For starters, it will ensure it does not get full because if it does, it could be a bit challenging to dispose of its content. What's more, emptying the dust cup reduces the potential for dust and dirt entering the motor or filter.

Keep the following in mind while cleaning the dust cup:

  • Switch off the cordless vacuum before you start cleaning.
  • Remove the dust cup and empty it into a bin.
  • Tap the dust cup gently to loosen and remove stuck dirt.
  • Use a moist, soft cloth to clean it.
  • For hard to reach areas inside the dust cup, use a soft-bristled toothbrush to pick out the dirt or debris.
  • Finally, clean the dust cup with a soft cloth and let it air dry for about 24 hours.
  • You can then fix it into the vacuum when it's dry.

2. Clean Your Filters

A vacuum's filter helps to separate dirt and dust from the sucked air into the machine. Depending on the appliance, there may be more than one filter. However, if your filters have dust and other materials stuck in them, it can affect the operation of your cordless bagless vacuum cleaner. In this case, you can rely on the vacuum's manual on how best you can care for your filter, especially if the vacuum has a high-efficiency particulate air (HEPA) filter.

A common practice is to clean the filters every three months. And if the filters are washable, you can use warm water to rinse them, then squeeze out excess water before leaving them to air dry. Nonetheless, keep the following in mind when cleaning a vacuum's filters:

  • Switch off the vacuum before cleaning.
  • Check the appliance's manual on how to remove the filters safely.
  • Tap the filter gently over a dustbin after it has been removed.
  • Hold the filter under tap water to remove the trapped dirt. Do not wash with soap.
  • Gently tap the filter to remove excess water and leave to dry for about 24 hours.
  • You can then proceed to fit it back into the vacuum cleaner when it's dry.

3. Check for Airways, Cavities, and Hose Blockage

One more way to clean a dirty bagless vacuum is to check the airways, wand, cavities, and hose if there is any blockage. These are areas that can easily be clogged with dirt, and if that happens, it could significantly impact the machine's suction power. Each of these parts can be cleaned by carefully removing it from the vacuum.

On how to clean a vacuum hose, do the following:

  • Refer to the manufacturer's instructions to pull each apart from the vacuum. After removing each part, take out the dirt or debris that is stuck in it.
  • Once you're certain that these parts have been thoroughly cleaned, you can replace them inside the machine.
  • Finally, test the vacuum to see if it's now functioning correctly.

4. Remove Dirt from Roller Brush

A brush roller may have pet hairs, dirt, threads, and other debris stuck to it. When that happens, it could tamper with the performance of your vacuum. A pair of scissors or a seam ripper can be used to remove hair and string that are stuck in the roller brush. Once that is in place, your vacuum will clean better. Some vacuums feature a separate attachment for pet hair; hence, these may have to be cleaned as well.

Conclusion

These are the steps on how to clean your cordless bagless vacuum cleaner, enabling you to maintain your appliance better. It's worth noting that a vacuum that is cleaned regularly will perform seamlessly. Nonetheless, ensure you wait for 24 hours for the vacuum parts to dry before assembling them.

Featured Image by Vacuum Guide.